Raiding other players in ROB RUN is not simply about finding an unlocked entrance and grabbing everything inside. You need to understand how Security Systems work, prepare enough Breach Decoders, and decide whether a target is worth the resources required to enter. A poorly planned raid can leave you spending valuable supplies without collecting enough loot to make the trip worthwhile.
Our team recommends treating every raid as a small resource-management operation. Before approaching a base, check which structures you want to enter and estimate their Defense values. This is especially important when planning to collect valuable items and ROB RUN Dirty Cash from properties with multiple secured buildings. The right decoder choice can save installation time and help you avoid unnecessary expenses.
Where to Get Breach Decoders
Breach Decoders are essential for opening secured player structures. Since each installation consumes one decoder, preparing a reasonable supply before leaving for a raid is important.
Finding Uncommon Decoders
Uncommon Decoders can be obtained through regular looting. Our team recommends checking:
- Safes and storage cabinets.
- Containers found during exploration.
- Loot collected from other robberies.
They are also available through the Season 1: Pure Chemistry battle pass. Players can claim an Uncommon Decoder on page three for 3,000 season currency.
However, battle pass rewards should be treated as an additional source rather than a reliable long-term supply. If you plan to raid several buildings, collecting decoders through regular looting remains important.
Trading for Epic Decoders
Players who want to reduce the number of installations can visit Lenny's Motel and find the barter trader behind the Suspicious Door.
There are two available exchanges:
| Exchange Requirement | Reward |
|---|---|
| 3 Uncommon Decoders + $10,000 | 1 Epic Decoder |
| 1 Filled Action Camera | 1 Epic Decoder |
The first option is straightforward, but the $10,000 fee should be included in your raid budget.
The second option allows you to keep your Uncommon Decoder stock, provided you already have a filled Action Camera.
Our advice is to avoid spending cash on Epic Decoders automatically. If you already have enough Uncommon Decoders and are targeting a lightly protected building, using your existing supplies may be the more sensible choice.
Which Breach Decoder Should You Use?
Decoder rarity determines how much Defense is removed with each installation. Stronger decoders do not change the basic breaching mechanic, but they reduce the number of times you need to interact with the Security System.
Each installation takes approximately 12 seconds.
| Decoder | Defense Removed | Installations for 15 Defense | Installation Time |
|---|---|---|---|
| Uncommon | 1 | 15 | 180 seconds |
| Epic | 3 | 5 | 60 seconds |
| Legendary | 5 | 3 | 36 seconds |
These figures only cover installation time. They do not include traveling to the base, locating terminals, moving between buildings, or collecting loot.
Understanding the Value of Each Rarity
One important detail is that upgrading decoder rarity does not necessarily increase your total breaching power.
For example, three Uncommon Decoders remove 3 Defense in total. One Epic Decoder removes exactly the same amount.
The difference is efficiency:
- Three Uncommon installations take approximately 36 seconds.
- One Epic installation takes approximately 12 seconds.
- The Epic Decoder saves around 24 seconds.
This makes Epic Decoders useful when you want to spend less time interacting with terminals, especially when attacking defended properties.
Legendary Decoders are even more efficient, removing 5 Defense per installation. We generally recommend saving them for structures with higher protection values rather than automatically using them on every target.

Calculate the Decoder Cost Before Raiding
Not every player structure has the same Security System strength. A Trailer, Mansion, Warehouse, and Car Garage all have different starting Defense values and maximum upgrade limits.
Fuses increase a structure's Defense, while the number of available Fuse Slots depends on its structure type.
The following table shows the base values and the decoder requirements when every available Fuse Slot contains a Legendary fuse.
| Structure | Base Defense | Fuse Slots | Maximum Defense | Uncommon | Epic | Legendary |
|---|---|---|---|---|---|---|
| Trailer | 5 | 9 | 50 | 50 | 17 | 10 |
| Small House | 15 | 27 | 150 | 150 | 50 | 30 |
| Mansion | 30 | 42 | 240 | 240 | 80 | 48 |
| Car Garage | 4 | 6 | 34 | 34 | 12 | 7 |
| Large Car Garage | 6 | 12 | 66 | 66 | 22 | 14 |
| Warehouse | 10 | 15 | 85 | 85 | 29 | 17 |
| Workshop | 5 | 9 | 50 | 50 | 17 | 10 |
| Grow Room | 5 | 9 | 50 | 50 | 17 | 10 |
| Chemical Laboratory | 3 | 6 | 33 | 33 | 11 | 7 |
| Mesh Fence | 2 | 3 | 17 | 17 | 6 | 4 |
| Metal Fence | 5 | 6 | 35 | 35 | 12 | 7 |
| Concrete Fence | 10 | 9 | 55 | 55 | 19 | 11 |
These numbers represent maximum protection, not the actual Defense of every building.
A Mansion may have a maximum Defense of 240, but that does not mean every Mansion you encounter will require 80 Epic Decoders. Always inspect the terminal and use its current Defense value when calculating your supplies.

Use This Formula for Quick Calculations
The calculation is simple:
Required Decoders = Current Defense ÷ Defense Removed per Installation, rounded up.
For example, a Trailer with 5 Defense requires:
- 5 Uncommon Decoders.
- 2 Epic Decoders.
- 1 Legendary Decoder.
Always round up because you cannot use part of a decoder installation.
Remember That Each Structure Needs Its Own Breach
This is one of the most important details when planning a player raid.
Opening a house does not automatically unlock its garage, warehouse, workshop, or Grow Room. Each secured structure has its own Security System, so you must calculate the cost separately.
Consider a route that includes a Mesh Fence and a Car Garage, both without additional fuse upgrades.
| Target | Current Defense | Epic Decoders Required |
|---|---|---|
| Mesh Fence | 2 | 1 |
| Car Garage | 4 | 2 |
| Total | 6 | 3 |
Although the combined Defense is only 6, you still need three Epic Decoders because each structure requires its own separate breach.
There is also an important exception: farm fences do not have Security Systems and cannot be hacked. Do not waste decoder supplies trying to open them.

How to Breach a Player Base
Once you have selected a target and prepared your supplies, the actual breaching process is relatively straightforward.
However, our team recommends following a consistent sequence instead of rushing through every terminal you encounter.
Step 1: Identify the Correct Structure
Approach the building you intend to enter and locate its Security System terminal.
Make sure you are interacting with the correct structure. If your target is a Warehouse, opening the main house will not give you access to it.
Step 2: Check the Current Defense
Inspect the terminal before using any decoder.
Compare its current Defense with your original estimate. If the owner has installed more protection than expected, recalculate your requirements before committing additional supplies.
Step 3: Install the Required Decoders
Choose the decoder rarity that makes the most sense for the target.
Continue installing decoders until the Security System reaches zero Defense.
Keep an eye on the remaining value so you do not accidentally underestimate the number of installations required.
Step 4: Enter and Collect Loot
Once the Defense reaches zero, the structure's doors, gates, and windows become temporarily accessible.
Move inside and collect the items you originally came for.
If you discover another secured building, treat it as a completely separate target. Check its Security System and calculate the additional decoder cost before proceeding.

Manage Raid Risks and Avoid Wasting Supplies
Successfully opening a Security System does not mean the raid is completely safe.
The owner may repair the system and lock you out again. Defense modules can also alert the owner's allies when an attack is underway.
This means installation time is not just a convenience factor. It can directly affect how much time you have to enter the building and collect loot.
Prioritize Valuable Loot
Before entering, have a rough idea of what you want to collect.
Instead of searching every container without a plan, prioritize the valuable items that justify the cost of the breach.
This becomes particularly important when using Legendary Decoders or spending cash to obtain Epic Decoders.
Know When to Stop
A common mistake is continuing to open additional structures simply because the first one was successfully breached.
Every extra terminal creates another resource commitment. If you have already collected the loot you came for, continuing the raid may expose you to unnecessary risks.
Our team recommends comparing the remaining decoder supply with the expected value of additional loot. If the next structure requires more resources than you are comfortable spending, leaving with your current haul is often the better decision.
Players who want to spend less time preparing supplies and managing repeated progression tasks can also explore ROB RUN Boosting options, while keeping their raid planning and resource decisions focused on the actual target.
Summary: Plan Your Breach Before Entering
Raiding player bases in ROB RUN is much easier when you understand how Security Systems and Breach Decoders work together.
The most important thing is to calculate each structure separately rather than estimating the cost of an entire property based on its appearance.
Before starting a raid, remember to:
- Collect enough Breach Decoders for your intended targets.
- Compare decoder rarity and installation efficiency.
- Check the current Defense of every secured structure.
- Calculate each breach independently.
- Account for possible repairs and defender alerts.
- Prioritize valuable loot and avoid unnecessary additional breaches.
A successful raid is not necessarily the one where you open the most buildings. It is the one where you spend your supplies wisely, collect worthwhile loot, and leave before the situation becomes unfavorable.
FAQ
How many Breach Decoders do I need to raid a Mansion?
It depends on the Mansion's current Defense. A Mansion can reach a maximum Defense of 240 when all its Fuse Slots contain Legendary fuses. At that maximum, you would need 240 Uncommon, 80 Epic, or 48 Legendary Decoders.
Always check the actual terminal value before preparing your supplies.
Are Epic Decoders better than Uncommon Decoders?
Epic Decoders are more efficient in terms of installation time. One Epic Decoder removes 3 Defense, which is equivalent to three Uncommon Decoders.
However, the total Defense removal is the same, so using Uncommon Decoders can still make sense when you already have a large supply.
Does opening one building unlock the entire player base?
No. Each secured structure has its own Security System.
You may need separate breaches for the main house, garage, Warehouse, Workshop, or other secured buildings on the property.
Can farm fences be hacked with Breach Decoders?
No. Farm fences do not have Security Systems, so they cannot be hacked using Breach Decoders.
Can a player lock me out after I breach their base?
Yes. The owner can repair the Security System and lock you out again. Defense modules may also alert the owner's allies during an attack.
For this reason, prepare your supplies in advance and avoid spending too much time inside the base.